Ads of bkmac53

Condition: Used / Good
Ad Description: Model 26RT 600 Series – S/N 0045937 - The Pako 26RT will process and dry rapid access contact, line and duplicating film, phototypesetting paper and film and polyester plates in the following sizes - sheet film from 5" x 7" to 26" x 48", roll film from 2.75" to 26" wide and PTS paper and film from 3" to 12" wide and up to 150' long. This unit comes with the Automixer III, which is designed to mix concentrate developer and fixer with water to meet precise specific gravity specifications through an automatic sequence. The processor replenishment pumps draw chemistry from the mixer as it is needed. The developer and fixer are stored in two separate tanks. Each tank has a light to indicate a low level and a light to indicate that there is enough room in the tank to mix a batch. An audible alarm will be activated if either tank shows a low level. Unit comes with Operating, Instruction, Maintenance & Parts Manuals. Approximate shipping weight: 600 lbs.

Condition: Used / Needs neuron replaced
Ad Description: Model 8200 Series – S/N 5028 – 1998 - Lrg format HeNe or red sensitive film & polyester plate imaging (32"x44"). Produces images at speeds of 400 scan lines/sec. Flexible imaging at any dpi between 500 & 6000. Spot size can be adjusted to 10-80 microns. Punches customized for press requirements. No transfer punching. CPSI Level 2 based RIPServer included, as well as manuals, user guide and numerous accessories. Glunz & Jensen Multiline online film processor (Model 860 / S/N 90178-0004), which handles up to 34" wide Media Rip, uses Truetype Fonts, DFF/Type 2 Fonts, Morisawa and Bitstream Fonts, Composite Fonts & Demand Loadable Fonts. Kaeser Reciprocating Compressor (Model KT1 / S/N A2A7657) with Seccomat & Cabinet. Unit comes with numerous manuals and accessories. Approximate shipping weight: 3150 lbs.

Condition: Used / Good
Ad Description: Model DT-14 – S/N 12566 - The VasTech DT-14 is a uniquely designed processor that incorporates a "Deep Tank" roller transport system. It is ideally suited to process a wide variety of photographic materials. The easily adjustable metered chemical replenishment system is perfectly suited for processing medium to high volume material. The Deep Tank in conjunction with the replenishment system will ensure maximum stability while providing high resolution with sharp and uniformed density output. Handles material with widths from .375" to 14" and lengths of 8" minimum and no maximum. Comes with stand. Unit comes with Service & Operators Manual. Approximate shipping weight: 300 lbs.

Ad Description: S/N G-298 This machine is a premium round cornering unit. With a cutting capacity of up to 2" thick, it can power through many jobs. This unit can handle paper and plastics of any size because of its open table. Gravity chip disposal keeps your workspace clean during production. The precise cutting action is unsurpassed. The Manual Challenge Cornerer accepts six standard size cutting units ranging in size from 1/8" through 5/8" radius. Operates with a manual foot pedal. Approximate shipping weight: 350 lbs.

Ad Description: Model SA 3 3/4 - S/N 1493 - Stitch from 2 sheets up to 3/4" of stock. The paper table easily changes from a saddle to flat position for doing corner and side stitching. Flat or saddle stitches pamphlets, booklets, catalogs and brochures quickly and easily. Convenient single handle adjustment for work thickness and compression. Throat depth is 12" flat and 15" saddle. Uses 25 - 30 guage flat or round wire. Unit comes with Operators Manual. Approximate shipping weight: 480 lbs.

Ad Description: Model 110-A 9 – S/N 275 - The Harris Macey Multibinder 9 Station Saddle Binder with a corner stitch attachment will handle booklets from 3.5" in width x 5" in length to 12" in width x 18" in length. The minimum collating size is 4-5/8" x 5" and the maximum collating size is 12" x 18". Flat sheet compatible. Unit comes with manual. Approximate shipping weight: 5480 lbs.

Ad Description: Model A22 – S/N 511.000222 - The C P Bourg A22 is a 22 bin commercial, friction-fed collator that handles a wide range of paper sizes from 5" x 8" to 11" x 17", as well as a wide range of paper weights, from 20# to cover stock. It uses counter balanced feed wheels for the reliable and consistent feeding of an intermixed range of stocks, coupled with a steel rubber roller transport mechanism for delivering your stock into offset stacking or various finishing modes. This unit also utilizes a miss and double detection control standard and a unique dual tray feed system. The dual tray provides an operator the capability to lo9ad a complete 46 station segment of your collator job when 46 stations are feeding. There is virtually no down time due to loading of stock with the dual tray option. This unit includes the C P Bourg TD1 sheet stacker (S/N 561000224). Unit comes with Operators Manual. Approximate shipping weight: 1050 lbs.

Ad Description: Model Auto 4 - S/N Y1085 / 577 – 1985 - This dependable machine is ideal for numbering, from invoices to raffle tickets to mailers. It will simultaneously number, perf, crease and slit in a single pass with unbeatable high speed and minimal maintenance. Numbers up to 6000 sph. Scores, perforates and slits up to 15000 sph. Platen-creases or perfs up to 6000 sph and rotary micro-perforates at up to 15000 sph. Micro-control allows you to multi-number and save job settings for repeat orders. Unit comes with Instruction Manual. Approximate shipping weight: 650 lbs.

Ad Description: Model SL 12 – S/N 8925 - The SL 12 Business Card Slitter can slit up to 120,000 finished cards per hour with hairline accuracy. The large diameter of the blade shafts assures minimal flexing, reducing the change of blade or shaft damage and also improving blade life. It has an exterior drive, which is easy to service and features a unique double gearbelt drive. The SL 12 uses a thick, machined and ground blade which can resharpened. This blade is almost impossible to chip through normal operation and is very durable. Gripper and tail trim is deposited into a removable canvas bag mounted within the steel cabinet. It features friction feeder, alignment table and a patented fan-out section. The slow delivery conveyor on the SL 12 is 36" long and features full length partitions between each row of cards. This is an excellent machine for medium demand wholesale and in-plant business card manufacturers. This unit can also do bust outs. Approximate shipping weight: 750 lbs.

Ad Description: Model Mega Max MM1 – S/N 226 – 1987 Sheet Counter / Tabber rebuilt 2005 with new electronics & head. Counting speeds up to 2500 CPM. Tab insertion from 3 to 9999 sheets. Two jogging plates. Locking steel cabinet base. 32" x 32" counting surface w/added drop leaf (34" x 43"). Lrg electronic LED displays. Six digit batch counter & totalizer. One button initiation. Approximate shipping weight: 460 lbs.

Ad Description: Model KP283 S/N 441 The Kansa Padder Series 3 applies a hot melt adhesive to one edge of a product to produce pads. The machine requires no setup when changing the thickness of the pads being produced, and will accept padwork up to 28" along the padded edge, allowing multi-up pads. The hot melt glue is automatically heated and maintained at the desired temperature for optimum performance. Can make pads from 2" x 2" to 28" x 14" with a maximum thickness of 1" and a minimum thickness of 2 sheets. Comes with conveyor belt and Installation, Description, Operation, Maintenance & Parts Manual. Approximate shipping weight: 2100 lbs.

Ad Description: S/N V 22226 The Miehle V50 Vertical is an automatic job cylinder press designed to handle the majority of printing jobs at maximum speed and minimum cost. I has a sheet size range of 3.25" x 5.5" to 14" x 20", handling all stock from .002 to .015 thickness. It is designed to print from simple type forms, half tones, color and process plates with maximum efficiency. The operating speed of the V50 ranges from 3000 to 5000 impressions per hour. Unit comes with Operating & Instruction Manual. Approximate shipping weight: 3250 lbs.

Ad Description: S/N T152369F The Original Heidelberg Windmill Letterpress is an all-purpose press, able to handle easily sizes from a business card to maximum sized sheets; from onion skin to cardboard; from a simple one color job to four color process work. This reliable precision manufactured machine handles a complete variety of jobs, feeding and delivering one, two or more pieces of stock simultaneously with maximum speed and quality. Unit comes with Operating Manual. Approximate shipping weight: 3150 lbs