Packing equipment

Condition:
Ad Description: ~~~~~~ REDUCED IN PRICE EVEN FUTHER FOR QUICK SALE! ~~~~~~ FEATURES: Stork Contiweb Festoon splice Reelstand.

Heidelberg Infeed with Weko web guides.

5 Printing units.

Vits 7 metre hot air dryer (natural gas)

4 roll chill unit.

Weko post chill web guide.

Silicone Application unit.

Technotrans mixing device.

Heidelberg Standard combination folder 8pp A4,16pp A5, 2x8pp D/P, 12pp Delta,4pp Tabloid.

Vits single cut sheet.

Microtrak cut-off control.

Standard Heidelberg CPC.

Plate bender.

Max press speed 40,000iph...

SEE PHOTO ON OUR WEBSITE BY VISITING -

http://www.tus.uk.com

Condition:
Ad Description: ~~~~~~ REDUCED IN PRICE EVEN FUTHER FOR QUICK SALE! ~~~~~~ FEATURES: Stork Contiweb Festoon splice Reelstand.

Heidelberg Infeed with Weko web guides.

5 Printing units.

Vits 7 metre hot air dryer (natural gas)

4 roll chill unit.

Weko post chill web guide.

Silicone Application unit.

Technotrans mixing device.

Heidelberg Standard combination folder 8pp A4,16pp A5, 2x8pp D/P, 12pp Delta,4pp Tabloid.

Vits single cut sheet.

Microtrak cut-off control.

Standard Heidelberg CPC.

Plate bender.

Max press speed 40,000iph...

SEE PHOTO ON OUR WEBSITE BY VISITING -

http://www.tus.uk.com

Condition:
Ad Description: REDUCED IN PRICE EVEN FUTHER FOR QUICK SALE! FEATURES: Stork Contiweb Festoon splice Reelstand.

Heidelberg Infeed with Weko web guides.

5 Printing units.

Vits 7 metre hot air dryer (natural gas)

4 roll chill unit.

Weko post chill web guide.

Silicone Application unit.

Technotrans mixing device.

Heidelberg Standard combination folder 8pp A4,16pp A5, 2x8pp D/P, 12pp Delta,4pp Tabloid.

Vits single cut sheet.

Microtrak cut-off control.

Standard Heidelberg CPC.

Plate bender.

Max press speed 40,000iph...

SEE PHOTO ON OUR WEBSITE BY VISITING -

http://www.tus.uk.com

Condition:
Ad Description: FOR SALE:- MULLER MARTINI PRESTO 6 x 1551 Feeders
1 x 1528 Cover Feeder
1 x 1550 Stitching Unit
4 x HK75 Stitching Heads
1 x 4th/5th Knife Attachment
1 x 1522 Trimmer
1 x Shingle Delivery

Please contact us for a Full Specification

Condition:
Ad Description: 4,5 mil imp!!!, in production , excellent condition, LOCATED: AUSTRIA!!! very nice machine,
please offer.

Condition:
Ad Description: POLAR 115 EM MONITOR Fully Programmatic
2 x Blades
Extended air table on the right hand side

This machine is a 1989/1990, Fully Cleaned and Checked.

This guillotine is running in our factory and can ber seen in production.

contact BMS on +44 1875 616 767 or e-mail us.

Condition:
Ad Description: STAHL THREAD SEAL PACKAGE STAHL Thread Seal FS100- year 2000
with Integral A43 Knife Unit (FS100 In Line Thread Sewer)
AND
STAHL KC 78 4KTL with FS100 THREAD SEAL
Continous Pile Feeder
Four Plate First Unit
2nd /3rd Folds Electronic Knifes
Delivery

We will sell this as a package or seperate, for quotations contact BMS on +44 1875 616 767 or e-mail us on the address above.

Condition:
Ad Description: Excellent condition like new ,
Price :US$ 29,000 ,

Condition:
Ad Description: 1989 Dominant 525P - 2 colour perfector, available immediately. Price: POA

Condition:
Ad Description: Inks etc Inks, oils, filters, scorotrons, bobins, other odds and ends

Condition:
Ad Description: Avantra 44 S year 2001 Avantra 44 S OLP (agfaline) manufactured February 2001 with rip Apogee PDF
with PC Dell 1400

Condition:
Ad Description: very good condition MODEL: P7100 B390N1-1EPD1 CAM DRIVEN 3900 MM REED WIDTH 2 (TWIN) WARP BEAMS 800 MM/FLANGE, 10 HARNESS FRAMES CAPACITY, 9995 DROPPERS 9995 HEDDLES D1 PROJECTILE 2.2 X 3 MM , ELECTRONIC BRAKE METER COUNTER, ACUMULATOR FEEDER: ONE PER LOOM IN SOME CASES 2 MAKE IRO 1WF 9107 WEFT SENSOR ELECTRICAL, FRAMES: 6 GROB EXTRA WITH PLENTY OF HEADLES , CENTRAL TUCKING NARROW TYPE AND 2 SIDE TUCKERS, ECCENTRIC BOX FOR 10, WITH LEVERS FOR UP TO 8, WHIP ROLLS: 2, CLOTH ROLLS. 1.5/LOOM, CONTACT BARS: 6, SPLIT BEAM 800MM 1.5 PER LOOM, SERIAL NUMBERS:3 X 110000, 3 X 111000, 17 X 112000, 24 X 107000

This offer subject to prior sale !!!

Condition:
Ad Description: Lotem 400 V year 2001 Lotem 400 V PSM with rip PSM 7.1 convoyor without processor
Available now.

Condition:
Ad Description: 4 COLOUR HEIDELBERG CD 74 FOR SALE 2002 HEIDELBERG CD 74 4 C FOR SALE
CP2000, Alcolor, Autoplate, Preset
Please contact me for full specification and details

Condition:
Ad Description: Primesetter 102 Heidelberg Primesetter 102 OLP (glunz) manufactured February 2001 with Rip Delta 6
with PC
Available now
Ex works Paris

Condition:
Ad Description: PRICE AND PHOTOS UPON REQUEST -
RYOBI 512 H......KOMORI 540 TMP Meurer graphic
Hauptstr 34, D-56414 Niederahr
Tel : 0049 2602 810 64
Fax: 0049 2602 811 82
Email : info@meurer-graphic.com
Homepage : www.meurer-graphic.com

Quotation – Used printing equipment –

Dear Sirs,

Price and photos upon request.

Ref.-No.: 20061001315
Group: sheet-fed press
Type: 2-colour offset
Manufacturer: Ryobi
Model: 512 H
Year of man.: 2002
Size: 52x36,5cm
Imprs. mio.: 9
Equipment: Ryobi Super Dampener filmdampening
inkroller washunit
preloading device
cylinder cocking
chilling and circulation dampening system
Powderspray
double sheet detector
Delivery: immediately

Ref.-No.: 20051201099
Group: sheet-fed press
Type: 5-colour offset
Manufacturer: Komori
Model: LITHRONE L-540 EHA
Year of man.: 1999
Size: 72 x 103 cm
Imprs. mio.: 96
Equipment: ink temperature control
Print cylinder washunit
Komorimatic Dampening
Ratio Setup
Preloading device
automatic format preset
Electronic double sheet control for cardboard
Pallet feeder
Photo electronic doublesheet control
Photo electronic side lays
Chromed plate and print cylinder
double sized print and transfer cylinder
Programed Blanketwash unit
auto ink roller wash unit
Powdersprac WEKO T 77C
Pult with Touch screen monitor
KMS Monitoring-System
Komori KHS System
Delivery: 12/2006
Please note:
Installed in 2000.
All dampening and ink rollers are new since
11/2005, wert approx. ?13.000,00.

All machines are in -as is- condition, unless
otherwise stated. We would be pleased to offer our quotes respectively in
LOT / FOB / CIF.
We trust that the above meets your requirement and look forward to your quick response.

Yours faithfully
Your TMP Team
TMP Meurer Graphic, your direct link to the German printing industry
Tel : 0049 02602 81064 ; Fax : 0049 2602 81182
www.meurer-graphic.com; info@meurer-graphic.com

Condition:
Ad Description: TWO COLOUR MO WITH CP-TRONIC FOR SALE 1991 HEIDELBERG MOZ-S FOR SALE
CP-Tronic, Conventional Dampening, c. 31 million impressions
AVAILABLE NOW!!!

Condition:
Ad Description: one RIETER open-end plant mill We have have one RIETER open-end plant mill that we would like to sell. Please find attached the photos from page 2 to 12.
The maintenance has always been serious in this mill and the RIETER Original (genuine) parts have been ordered regularly. Thus, the machines are inexcellent conditions.
We have also included some Q&A to indicate technical details about this modern spinning mill.
We are ready to sell at a special price of 750'000 Eur C&F Asia port.
Kindly contact us if you need to inspect this mill in Casablanca, Morocco. Welcome in advance.
With our best regards.
Nota bene :
Below some technical Q&A about this modern spinning mill :
1) For each of the 3 Open end machines R20 that are included, there are :
- which rotor diameter ? --> 2 sets of Rotors. For both sets, the diameter is 35 mm. There is 1 set for cotton (type SB) and 1 set for synthetics fibers (type ND).
- which opening rollers type ? --> 2 sets of openning rollers : 1 set for cotton (type OB20DN) and 1 set for synthetics fibers (type OS21DN).
- which type of clearers ? --> The clearers are USTER Polyguard type UPG 5 RB.
- which conicity of the take up packages ? --> 2 degrees with a weight up to 5 Kg (340 mm diameter !).
- how many piecer/doffing carriages per machine ? --> 2 robots per machine. Each robot makes simultaneously the piecing and doffing operation.
2) We confirm that the power supply is 380V X 50 Hz X 3 Phase.
3) What kind of product that has this machine produce?
We were producing mainly acrylique/coton/polyester and acrylic/cotton intimate blends in Ne 17 and Ne 18. Meaning the blending is done at the preparation stage (blowroom), and not at the drawing frame stage.
We also produced Ne25 in 100% cotton for garment.
In general, he can produce the yarn count range from Ne 4 to Ne 40.
4) How much tons that could be produce for 20 S?
You can expect to produce in 24 hours about 3 Tons of yarn Ne20 synthethics and cotton.
5) Can do rayon production or not?
Yes you can produce rayon yarn
6) The spare parts is it available for rayon?
Yes, the only part thay has to be bought extra is the buses.
7) The correct size for machines OE length?
The open-end R20 model with 220 rotors (11 sections) has the below dimensions :
The length is : 32,5 meters
The width is : 3,16 meters.
8) Size of D x T can?
450 mm diameter x 1m height
9) RPM Rotor?
This type of machine RIETER R20 can easily run at 100'000 rpm, however looking to the long term, we were prudent and conservative. Thus, the maximum these machines have been runned at is : 75'000 rpm. This low speed has kept the machine in excellent conditions.
10) What kind of product that has this machine produce?
We were producing mainly acrylique/coton/polyester and acrylic/cotton intimate blends in Ne 17 and Ne 18. Meaning the blending is done at the preparation stage (blowroom), and not at the drawing frame stage. We also produced Ne25 in 100% cotton for garment.
11) Bale plucker available or not?
As far as feeding raw material bales concerns, this mill includes :
Year 1994 - 1 Machine RIETER Feeder Cotton B3/4R for Feeding, pr?-opening and weighting of raw material
Year 1994 - 2 Machine RIETER Feeder Synthetics B3/4S for Feeding, pr?-opening and weighting of raw material
Year 1994 - 1 Machine RIETER Feeder Synthetics B3/4S for Feeding, pr?-opening and weighting of raw material
12) Others technical details :
Spinning cans for Cards, TEXPAC in good shape with rollers anti-dust : Diameter 600 mm x 1,15 m height.
spinning cans for drawing frames, Quantity = 1000 units, ERNST KRUGER HORNEX (Germany) of year 1998 in excellent shape with rollers anti-dust : Diameter 450 mm x 1 m height.
On the drawing frames, there is a RIETER Autoregulation system (sliver monitor) and also an automatic cans changer (for replacing full cans with empty cans).
Number of ends in the drawing frame creel : 8 on one face + 8 on the other face, thus in total : 16 positions.
About the winder Savio Ras 15 of 56 spindles :
-which type of feeding : --> Manual bobin feeding with a diameter maximum of 250 mm.
- which type of clearers : --> USTER type D4 SLMT with an electronic detector of yarn breakage.
-Which type of knotter : --> type B 782.
-Waxing device --> Yes, positif with a waxing cylinder of diameter 38 mm, a length and width of 45 x 15,2 mm.
-Take- up package : --> whith conicity of 5° 57 and a traverse of 152 mm (which is 6")
About the twister Savio Twisting TDS
- which model ? 190 or 228 ? : --> type 190M of 180 spindles two for one twisting.
- feeding : 8" package ? or other ? : --> 8" cylindrical packages.
- take up package : 4° 20 or 5° 57 conicity ? --> 5° 57 and a traverse of 152 mm (which is 6") and a diameter of 300 mm.
Nota Bene : this twisting machine has pneumatic alimentation of the yarn.
About waste suction, suction fan for all blowroom and cards : yes, there is AIR waste air suction plant from LUWA for blowroom and for cards. However, the fiber waste recollection from the cards is done manually.
Please note that there are 2 air-conditionning systems included in the sale : 1 air-conditionning from LUWA (the one for which there are the photos) and 1 air-conditionning made by LTG AMELIORAIR that is brand new (still in its boxes and never erected) dating of 2003. For this LTG equipment, we can supply you the drawings of the room and you can build this room and install the LTG new equipment as if you have a brand new spinning mill.

List of RIETER Spinning Machines
Year of construction Quantity Type, model and description
P R E P A R A T I O N M A C H I N E S
1994 3 Machines RIETER Contimeter B0/1
Machine for very precise mixing of different components
1994 1 Machine RIETER Uniclean B/1
Machine of preparation : cleaning and dedusting
1994 1 Machine RIETER Feeder Cotton B3/4R
Feeding, pr?-opening and weighting of raw material
1994 2 Machine RIETER Feeder Synthetics B3/4S
Feeding, pr?-opening and weighting of raw material
1994 1 Machine RIETER Feeder Synthetics B3/4S
Feeding, pr?-opening and weighting of raw material
1994 1 Machine RIETER Fine Cleaner ERM B5/5R
Machine of preparation : cleaning
1994 1 Machine RIETER Unimix B7/3R
Homogenizing machine
C A R D I N G & D R A W I N G F R A M E S M A C H I N E S
1994 5 Machines RIETER CARD FEEDING AEROFEED A7/U
Card alimentation unit
1994 5 Machines RIETER CARDS C 10
Very good shaped cards for open-end and ring
1998 1 Machine RIETER DRAWING FRAME AUTOREGULATED RSB-D30
1998 1 Machine RIETER DRAWING FRAME SB-D10
also included : 2 Machines RIETER DRAWING FRAME D0/2
2 Machines RIETER DRAWING FRAME D0/2
1991 2 Machines VOUK DRAWING FRAMES type SH2/D-E
with USTER autoregulation (1 non regulated and 1 auto-regulated)
O P E N E N D S P I N N I N G M A C H I N E S
1998 3 Machines RIETER OPEN-END R20 of 220 POSITIONS
Among latest generation of full automatic open-end machine
W I N D I N G & T W I S T I N G M A C H I N E S
1988 1 Machine SAVIO WINDING MACHINE type RAS15 of 56 Spindles
1990 1 Machine SAVIO TWISTING MACHINE type TDS of 180 Spindles
1990 1 Machine ROF ASSEMBLY WINDER of 16 Spindles
MACHINES IN EXCELLENT SHAPE, available immediately!
+ Stock of raw material (acrylic, polyester, viscose) in bales
+ 1 Air Conditioning Unit from LUWA (Switzerland) including cards filtration.
+ 1 BRAND NEW air conditioning unit from LTG (Germany) still in its boxes, never erected able to air-condition
the totality of the above machines. We could supply you the LTG plan and the central’s room dimensions to be built
in your mill.
+ 1000 Spinning cans for Open-end feeding, ERNST KRUGER HORNEX (Germany) in excellent shape with
rollers anti-dust : Diameter 450 mm x 1 m height
+ Others spinning cans for Cards, TEXPAC in good shape with rollers anti-dust : Diameter 600 mm x 1,15 m height
+ Lot of spare parts for : RIETER, SAVIO, LUWA, ROF…
+ USTER TESTER UT3 + other laboratory equipment (such as : torsion meter, balance)
All above machines, equipment and accessories are to be sold in one lot. Even the electricity generators and
air compressors are included in the same lot. In BONUS, we are ready to deliver for FREE a complete SACM
(France) preparation line and cards with their spare parts.

Condition:
Ad Description: Roland R606 + UV+ 2.5m Long Delivery Roland R606 + UV+ 2.5m Long Delivery
Model: Grey and White color
Year: 1990
Total Imp.: 81 mils
Equip with:
R.C.I.
Rolandmatic alcohol dampening
Plate remote control
With pile suction stream feeder
Electronic accoustic sidelay
Non stop feeder and delivery
Grafix powder spray
Spectral UV (3+1)
Technotrans cooling and circulating system

Special Price: Euro 235,000 (FOB)

For more information, pls feel free to contact me.

Stella Wen
Bridge Printing Machinery Co Ltd
Tel: 886-2-2722-8358
Fax: 886-2-2725-2777

Condition:
Ad Description: Original Owner Excellent Condition 1985 Miller TP29S 4 Color 4/0 , 2/2 Perfecting (1 Owner Machine)
Unimatic C3 Console

Millermeter dampening

Spiess Feeder

Grafix Sprayer

Baldwin Recirculation and Refrideration

72 Million Original Impressions

Includes Plate punch and approx. $10,000.00 worth of new spare parts.

Price: $75,000.00 Canadian LOC